Report: UN Dangerous Goods Packaging Bulk bags Test Report
applicant:
Jiangsu Taiji Packaging Co., Ltd
manufacturer:
Jiangsu Taihua Plastic Products Co., Ltd. (No. 155 Taigao Road, Sixiang Town, Taizhou City, Jiangsu Province, China)
Test sample:
Flexible Intermediate Bulk Container (FIBC) Dangerous Goods Container Bag
Bucket size: 900x900x800mm,
Coating: UV treated, weight: 3.14kg.
Main fabric: 190g/㎡, color: white, double-layer. Meridian/latitude density: 52x52 square decimeters.
Four lifting nets, width 100 x height 300mm, 50g/m; Color: White, double-layer.
Fill size: φ1150x850mm， Display size: Flat water.
There are two mesh safety belts around the bag, with an outer diameter of 70mm, 45g/m, and a color of white.
Test basis:
Revised 22nd edition of the United Nations Model Regulations on the Transport of Dangerous Goods, Section 6.5.6
Test request:
Maximum allowable total mass: 2000kg
UN Mark:
13H2/Y/0724/CN/C231803/10800/2000
Test preparation:
Samples (No.4-6) should be filled with plastic particles and fine crushed stones to not less than 95% of their capacity and SWL, and the load should be evenly distributed.
Test results:
Top lift test: Passed
Tear test: Passed
Tilt performance test: Passed
Recovery performance test: Passed
Decline Test: Passed
Stacking test: Passed
(Please refer to Appendix 1-2 of this report for details)
Assessment results:
The test results of the above samples meet the requirements of the United Nations recommended Class II dangerous goods packaging test results.
original script : UN Dangerous Goods Packaging Bulk bags Test Report
